Masculine Card with Dragonfly

Turns out you can make masculine cards with Stamping Gear flowers, if you chose the right patterns and ink.  I stumbled across this while playing around.  I bought a dark green, almost gray ink pad that, when used with the flower in the center of the Stamping Gear circular gear, came out looking pretty awesome.  So I did it up as a card.  It's not perfectly symmetrical, but I'm sure that will improve with experience.  I added a punched dragonfly (plus glitter glue) just for fun.

Supplies:
Cardstock: Recollections
Ink: Memento
Stamps: Stamping Gear, Stampin' Kimmie Steampunk Sentiments
Punch: dragonfly (can't remember the company and with a kitty sleeping on my lap I can't go upstairs to check)
glitter glue

Stamping Gear Card: Believe

One of the designs I tried out two days ago when playing with Stamping Gear looked like it would make a great card.  So I made one.  The design is a tiny bit too large for the paper, but looks good all the same.

Supplies:
Cardstock: Recollections
Stamps: Stamping Gear, ? (the sentiment was a cheap stamp from Michaels and I don't remember what company it was from as I bought it a few years ago)
hot-fix rhinestone

Stamping Gear Review Part 1

I know I said I'd review Inkadinkado's Stamping Gear in a few weeks, but I had the chance to play with it yesterday and learned several things that I want to share before I forget them.

First, removing the product from the packaging:

I don't know that I've ever had so much trouble getting a product out of the package before.  I was hoping to keep the cardboard in relatively good condition, as there are lots of good tips on it, but no luck there.  I was able to pull apart the paper in a few places to get the rings out, but I had to cut out the last few.  Also be careful, as one set of stamps has instructions underneath them.  They're basic instructions (the stuff they mentioned in the video with a few tips and example art pieces).

Onto the pieces themselves.  As I was afraid, the rings are quite large BUT, if you put the stamps close to the tab on the stamping piece for the cogs and away from the tab on the gears when stamping on the inside of the gear, you can make pretty small designs, suitable for card crafting.  If you're into scrapbooking, there's no problem and you can make quite nice larger designs with these, especially when using the outsides of the gears.

Here's a close-up of the circle cog, gear and stamper.  The cogs and gears both have little arrows sticking out at the compass points helping you orient your pieces for symmetrical designs, as well as mini cut out arrows every second tab.  This helps you if you're only stamping every second tab for more open (rather than overlapping) designs.

The stamper has alignment lines, which are useful for getting your stamp in a good position as well as if you're doing straight lines (rather than using the gears/cogs).

The tab system works great, though you have to watch the ovals, as not all designs will come out symmetrical (due to the size of the stamp and how ovals work.

And a close-up o the bottoms:

There's a soft foam backing, which helps keep the cogs/gears from slipping when you use them.  This was particularly helpful to me, as I tend to hold my stamp and stamp pad when inking (the videos for Stamping Gear all suggest keeping one hand on the gear/cog and the other inking the pad).  It's a little hard to see on this picture, but there's a notch on the top and bottom tabs on the stamping piece that fits into the notches on the cogs/gears.

I tested the system with cling stamps that didn't come with it, to see if they worked.  They do.  I had no problem using other Inkadinkado cling stamps, as well as Local King Rubber, Fiskar's and Stampin' Kimmie.  Alas, as the picture below shows, the system doesn't work with clear stamps.  They're simply too thin, and don't clear the notch on the stamping piece and therefore will stamp if they're far enough away from the gear/cog, but not if they're close.

You can see what I mean in the heart picture below.  The outline stamp is a cling stamp, but I tried to line it with a clear heart vine stamp and then add a clear solid heart inside. Neither of the clear stamps worked properly.

You also have to remember if you're stamping with the wide end of the stamper or the short end.  This sound easy, but if you put the stamper in the wrong way you can mess up your design pretty quickly.  I only had this problem when I was stamping on the inside of the gears, but it's easy to get mixed up when you're inking your stamp, which way is 'up' for the design.

Here are some patterns I made, some with the stamps that come with the set, some with my own stamps.  Tomorrow I'll post some cards I made using designs I tried on these 8 1/2 x 11 test pages.

My Stamping Gear Deluxe Kit Has Arrived

Guess what arrived in the mail yesterday...

I know, I was going to wait and see how others use it for card crafting, but I got a 40% off coupon for liking Fiskar's on facebook, which made the kit plus shipping less than the kit on its own.  Hard to turn that down.  And now I can review the set for others. :)

Here's one of my kitties checking it out.  The Deluxe Set comes with both the circle and oval gears and cogs, the stamping tool and 4 sets of stamps.  I'm hoping to play around with the kit this week and next week (next week I've got another set of book review posts), after which I'll get a review up here for those of you out there on the fence about stamping gear.

Flight of the Butterflies

If you haven't noticed, I love butterflies.  Here's a card I gave one of my sisters for her birthday last year.

Supplies:
Paper: Recollections cardstock, parchment
Punches: Recollections, Martha Stewart, Fiskar's 3-in-1

Butterfly Train

I thought this week would be less busy than last week, as that's not the case you're getting another, older card.

The butterfly was cut on the Silhouette, and I used hot fix rhinestones for the 'train'.

Supplies:

Cardstock: Recollections

Rhinestones: Imaginesce

Autumn Tree Card

A while back I decided to try and start using all the specialty papers I've got lying around.  When I was a child I remember using transparent paper one of my parents brought home from Germany.  After looking for a similar product in Canada for years, I got the chance to go to the source.  The paper is a cross between tissue paper and wax paper, being thicker than tissue but not grainy, and yet also being thinner than wax and available in multiple colours.

It wasn't easy to locate, but I did find some.  And here's a card I made with it.  I cut the tree out with a craft knife, then cut a frame out of my base card so the transparency of the paper would be visible.  Using some other colours, I punched leaves.  This is the card in regular light.

This is it partially back lit so you can see the tree but also still the leaves.

 Here it is fully back lit.

I've got some more ideas of what to do with this paper, when time permits.  The closer it gets to Christmas, the less time I'll have for experimenting with papers as I'll have to work hard to get all my cards ready in time.

Supplies:
Cardstock: Recollections
Transparent Paper: Folia Paper
Punch: ? not sure, it's a cheap punch I picked up a craft show with no logo on it